Deutz 914 Spécifications télécharger pdf (Page 18)

Service

Servicing of the power unit consists of periodic inspection, lubrication and if

necessary, adjustment. Repairs are covered under the Hydraulic System

Troubleshooting section beginning on page 19 or the Engine System

Troubleshooting section beginning on page 21.

The unit should be fully inspected at the start of every job.

Daily inspections should look for:

1) Worn, wrinkled, bubbled, leaking or broken hoses or other evidence of

damage;

2) Visual evidence of physical damage to the unit;

3) Loose, worn or improper electrical connections;

4) Proper hydraulic fluid level;

5) Once operating, the state of the filter.

As most items in the unit are lubricated by the hydraulic fluid, they don’t

require other lubrication than to insure the hydraulic fluid is clean.

The engine does require periodic oil and filter changes. Under moderately

dirty conditions the engine oil should be changed every 500 hours. Under

severe conditions this should be done every 250 hours.

Hydraulic oil should be a good quality mineral based ISO VG 46 hydraulic

oil, such as Mobil DTE 25. Many others are suitable as well. Use of

vegetable based, water based hydraulic fluids or the like may damage the

pump and valving.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 63 64

Pas de commentaire

Deutz 914 Spécifications Page 18