Deutz 914 Informations techniques télécharger pdf (Page 30)

3

© 2001

with cold start assistance/glow

lamps

FR 60 = 9,5 and 19 Volt

● Insert key

– Position 0 = no operating voltage

● Turn key clockwise

– Position 1 = operating voltage

– Pilot lights illuminate

● Push key in and turn further clockwise

against spring pressure

– Preheat lamp comes on

– Position 2 = preheat for approx. 60 secs.

(holding key*)

– Preheat lamp extinguishes

– Position 3 = start

● Release key as soon as engine fires

The pilot lights will go out.

3.2 Starting Engine Operation

with cold start assistance/glow

lamps

FR 20/30 = 11 and 23 Volt

● Insert key

– Position 0 = no operating voltage

● Turn key clockwise

– Position 1 = operating voltage

– Pilot lights illuminate

● Push key in and turn further clockwise

against spring pressure

– Preheat lamp comes on.

– Position 2 = preheat for approx. 20-30

secs., (holding key*)

– Preheat lamp extinguishes

– Position 3 = start

● Release key as soon as engine fires

The pilot lights will go out

* Fuel particles not burnt during initial com-

bustion in the cylinder are subjected to a

second stage combustion process for

approx. 3 minutes in order to let the exhaust

gases become more transparent in the

start-up phase.

* Fuel particles not burnt during initial com-

bustion in the cylinder are subjected to a

second stage combustion process for

approx. 3 minutes in order to let the exhaust

gases become more transparent in the

start

-

up phase.

© 25 746 2© 25 746 2

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 84 85

Commentaires sur ces manuels

Pas de commentaire