Deutz 1012 Spécifications télécharger pdf (Page 147)

100

101

Service Training

Section 4.4

Page 3

OPERATION OF THE POWER STEERING

The oil from the pump (28) enters the steering control valve (B) at port P2, flows through the steering control

valve (17), leaves the valve through port T1 and goes back to the tank through the oil cooler (E).

Turning the steering wheel closes the P2-T2 connection and the oil coming from P2 is fed to the steering

cylinder via port R or L. The maximum pressure on the primary side is set to 150 bar.

When the steering wheel is not operated, the secondary valves (16) limit the restoring force and the peak

pressures connected therewith to 220 bar.

The make-up valves (15) ensure that the steering can be operated in an emergency.

1 2 ... 142 143 144 145 146 147 148 149 150 151 152 ... 281 282

Service Training 1
353 804 2401.0906 282

Commentaires sur ces manuels

Pas de commentaire

Deutz 1012 Spécifications Page 147

Commentaires sur ces manuels

Produits connexes et manuels pour Moteur Deutz 1012