Deutz 1012 Spécifications télécharger pdf (Page 246)

100

101

Service Training

Section 4.9

Page 20

12.05

CHECKING THE MECHANICAL IGNITION TIMING ARRANGEMENT IN SITU

- Set cylinder 1 of the internal-combustion engine at top

dead centre on the compression stroke.

- Pull off the connector of the ignition control unit (1).

- Unscrew and remove the ignition control unit (1).

- Push the timing pin Ø 3 mm (5) through the hole (4) in the

toothed disc (3) into the hole in the housing (2).

NOTE: The mechanical adjustment is correct, if both

holes align when the engine is set at TDC.

1 2 ... 241 242 243 244 245 246 247 248 249 250 251 ... 281 282

Service Training 1
353 804 2401.0906 282

Commentaires sur ces manuels

Pas de commentaire

Deutz 1012 Spécifications Page 246

Commentaires sur ces manuels

Produits connexes et manuels pour Moteur Deutz 1012