Deutz 1012 Spécifications télécharger pdf (Page 243)

100

101

Service Training

Section 4.9

Page 17

12.05

CHECKING THE IGNITION TIMING

A timing light is required for measuring the ignition point. It must be connected between the ignition coil and

spark plug of the number 1 cylinder. For the check, the ignition coil must be unscrewed from the bracket

of the number 1 plug. The removed coil is then connected, using a spare ignition cable to the spark plug,

the timing light can then be attached to this cable.

NOTE: A conventional spark plug HT lead is required for this test.

The firing point is 8° ± 2° BTDC at an idle speed of 750

+ 50

rpm.

CONNECTING DIAGRAM FOR SPARK PLUG CABLES

1 2 ... 238 239 240 241 242 243 244 245 246 247 248 ... 281 282

Service Training 1
353 804 2401.0906 282

Commentaires sur ces manuels

Pas de commentaire

Deutz 1012 Spécifications Page 243

Commentaires sur ces manuels

Produits connexes et manuels pour Moteur Deutz 1012