Deutz 1012 Spécifications télécharger pdf (Page 39)

100

101

Service Training

Page 31

Section 4.1

09.06

CHECKING

Check thermostat in removed condition.

- Measure dimension „a“ on the thermostat.

NOTE: „a“ = stroke beginning at approx. 83 ± 2°C (T1)

„b“ = stroke ending at approx. 95°C (T2)

- Heat up thermostat in the water bath.

For a determination of the exact opening point, the

temperature reading should take place as closely as

possible to the thermostat, however, without contacting

the latter.

The water must be continuously stirred to arrive at a

uniform distribution of temperature. The rate of rise of

temperature should not exceed 1°C/ min. at a maximum

otherwise opening will be delayed correspondingly.

- Measure dimension „b“ on the thermostat.

Stroke length at indicated temperature (T2) 8 mm at

aminimum.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 281 282

Service Training 1
353 804 2401.0906 282

Commentaires sur ces manuels

Pas de commentaire

Deutz 1012 Spécifications Page 39

Commentaires sur ces manuels

Produits connexes et manuels pour Moteur Deutz 1012