Deutz 914 Spécifications télécharger pdf (Page 45)

Belt drives Servicing and maintenance works

Tighten belt

Loosen screw (1).

Remove the outer half of the belt pulley (2).

Remove belt and fit new one.

Checking the belt tension (



43).

Tighten belt

In order to re-tension, remove one or more of the

intermediate discs (3) on the inside. Place the re-

moved discs on the removed belt pulley half (2)

on the outside.

Re-tighten screw (1). Turn the engine over whilst

tightening to prevent trapping the V-belt.

Air compressor with double V-belt

Unscrew hex. nut (1), remove V-belt pulley half

(2), V-belt (3) and intermediate pack of discs (7).

Remove intermediate disc (4), rear V-belt (3), in-

termediate pack of discs (6) and the V-belt disc

half (5).

To re-tighten, remove one or more of the inter-

mediate discs from the packs (6) and (7). Place

the removed discs in front of, or behind, the V-

belt pulley halves (2) to ensure that the belt align-

ment is maintained. Always remove the same

number of intermediate discs from each pack.

Installation in reverse order. Turn the engine

over whilst tightening the nut (1) to prevent the V-

belt from being trapped.

OBJ_DOKU-16314-001.fm Seite 45 Donnerstag, 24. Juli 2008 11:18 11

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 63 64

Pas de commentaire

Deutz 914 Spécifications Page 45