Deutz 914 Spécifications télécharger pdf (Page 50)

Faults Fault table

Faults and remedies

Faults Causes Measures

Engine does not start or is difficult to

start

Not disconnected (if possible) Check coupling

Engine stop lever still in stop position Check/replace

Below starting limit temperature Check

Fuel tank empty Vent fuel system

Fuel suction pipe blocked Check

Fuel quality does not comply with operating manual Change the fuel

Fuel filter contaminated Check/replace

Air in fuel system Vent fuel system

Cold starting device Check/replace

Injection line leaks Check injection line

Injection valve defective Check fuel injector / change if necessary

Wrong SAE viscosity class of the engine lubricating oil Change the lubricating oil

Battery defective or discharged Check battery

Cable connection to starter loose or oxidized Check cable connections

Starter defective or pinion does not engage Check starter

Incorrect valve clearance Check valve clearance and set if necessary

Air filter clogged / turbocharger defective Check/replace

Compression pressure too low Check compression pressure

OBJ_DOKU-16314-001.fm Seite 50 Donnerstag, 24. Juli 2008 11:18 11

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 63 64

Pas de commentaire

Deutz 914 Spécifications Page 50